- Read t his docum ent before using.- Keep t his docum ent .- Observe all warnings and caut ions.
PAGE 1 OF 4
VNI-WS8
DP3419/Rev01 - DI
PS8 Wall Bracket
Contents:
X1 (Arm)
X1 (Adapter)
X2
X1
Weight: 1.2 kg / 2.7 lb
Page 1: ...Read this document before using Keep this document Observe all warnings and cautions PAGE 1 OF 4 VNI WS8 DP3419 Rev01 DI PS8 Wall Bracket Contents X1 Arm X1 Adapter X2 X1 X2 X1 X1 X2 Weight 1 2 kg 2 7 lb ...
Page 2: ...ions Adapter mounting Remove 2 screws from the PS8 and use the 2 screws and the 2 washers provided to fix the adapter Please do not push on the 2 screws while screwing them to avoid disengaging the bolt that is inside the cabinet WARNING Screws must be secured using Loctite 243TM Tilt in vertical position ...
Page 3: ...all warnings and cautions PAGE 3 OF 4 Tilt in horizontal position Adapter Arm mounting For the wall mount of VNI WS8 please select screws and mounting location supporting 4 times the system weight Tighten well to cancel any float between the arm and the adapter ...
Page 4: ...Observe all warnings and cautions PAGE 4 OF 4 Safety device Use the parts provided NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself Please check the web site nexo sa com for the latest update ...
