Nexo NXAMP4x1mk2, User Manual

Page: 23 / 70

SETTINGS MENU
NXAMPMK2 USER MANUAL PAGE 23 / 70
NB: You can adjust larger differences of gain between channels with the volume menu. There is no
difference between gain and volume setting; this distinction is only done by analogy with traditional
amplifiers. The CPU will always check gain, volume, patch and headroom settings and decide what the best
combination is between analog or digital gain to optimize the dynamic range of the system.
ARRAY-EQS
Select an Array-EQ in a channel (button is highlighted), then turn the wheel to change the Array-EQ setting.
You can select multiple channels, when a selected channel reaches the maximum value, it will cease to
increase by continuing to turn the wheel, but other selected channels may still increase the setting; Be careful
not to change a gap between two channel settings when selecting multiple channels at the same time.
In some special circumstances (cardioids setups for example) it is mandatory to have same Array-EQ
settings on two or more channels. Then changing the Array-EQ on one of these channels will automatically
adjust the Array-EQs on the other channels.
EQ
Press on any of the EQ thumbnail in a channel to adjust the 8-band full parametric EQ filters parameters.
You can press several preview curves in a short time to edit multiple channels at once. On the displayed EQ
View, press [+] to add a new EQ band. Pressing on one of the EQ points directly from the graph will show
the following menu: