MAINTENANCE
ID24
Page
11
/
16
MAINTENANCE
NOTE:
Speakers and Grills can be sent back to NEXO for recycling
1.1
Grille
ID24t
Remove the 4 screws and the 2 Fixgrill.
Tightening torque: 1 Nm
Remove the grille from the 4 plastic bolts
(2 on the top and 2 on the bottom).
Pull forward.
ID24i
Remove the 4 screws and the 2 Trifix.
Tightening torque: 1 Nm
Remove the grille from the 4 plastic bolts
(2 on the top and 2 on the bottom).
Pull forward.
1.2
Horn (remove the grille before)
Remove the screw and the knob (take care with
the spring). Slide the horn forward (be careful
with the cables).
Tightening torque: 1.7 Nm
Remove the 2 screws to change the horn.
Tightening torque: 1 Nm
Align the marks to reassemble.
