NEXIQ Technologies Brake-Link, Manual

Page: 82 / 112

76 Brake-Link™ Meritor WABCO ABS Application
Chapter 3
• Using Meritor WABCO ABS Application (Trailer)
Viewing Stored Faults
Once you repair a problem, the ECU moves the associated fault code to the stored
list for future reference. Use this list to detect intermittent problems. For example,
repair the vehicle; then, clear the stored fault codes before cycling power or per-
forming a road test. A code that appears in the stored list, that isn’t in the active
list, after cycling power or road testing, indicates an intermittent problem.
The rest of this section explains how to view stored faults with each method of
navigation.
View stored fault codes
via menu navigation
:
1
Connect Brake-Link™ to the tractor or trailer and power-up (see “Connect-
ing Brake-Link™ Components”, on page 8). Brake-Link™ boots up and pre-
sents the
Select Application screen.
Use the and keys to select MERITOR WABCO ABS ; press
.
2
Brake-Link™ displays navigation options; use the and keys to
select MENU NAVIGATION and press .
3
Next, it presents the Protocol Selection screen. Use the and
keys to select the desired option and press . See “Selecting a Proto-
col”, on page 59.
S E L E C T A P P L I C A T I O N
G E N E R I C P L C T E S T
B E N D I X / K B / E A T O N A B S
M
E R I T O R W A B C O A B S