manualshive.com logo in svg

NEXIQ Technologies Brake-Link, Manual

Share
Download
NEXIQ Technologies Brake-Link Manual Download Page 47

 - Using the Meritor WABCO ABS Application

Brake-Link™ Meritor WABCO ABS Application  41

Tests

Brake-Link™ offers the following tests:

•

TEST WARNING LAMP

 to ensure the ABS Warning Lamp on the out-

side of the tractor is working properly 

(pg. 42)

.

•

TEST VALVES

 to ensure the modulator valves are working properly 

(pg. 44)

.

•

TEST SENSORS

 to ensure that the wheel sensors are connected to the 

correct wheels and to detect the greatest wheel speed for each wheel 

(pg. 47)

.

• TEST RETARDER RELAY 

to momentarily open the retarder relay con-

tacts.

 

(pg. 50)

.

• TEST RETARDER DATALINK 

to temporarily disable an electronic re-

tarder that uses a J-1922 or J-1939 data link 

(pg. 52)

.

• TEST ENGINE DATALINK 

to monitor the change in engine torque and 

revolutions per minute (rpm)

 

(pg. 54)

.

Access all tests by way of menu navigation.

Summary of Contents for Brake-Link

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands