Nexel 243056 Manual Download Page 5

DEFROST 

 

Accumulation of frost in your freezer will reduce its efficiency and increase energy 
consumption. Remove the frost by removing all food and content, uninstalling all 
compartments and shelves, unplugging the power cord, and leaving the door open.  
Wipe up the water from the melted frost with a dry cloth. 

 
POWER FAILURE AND DISCONNECTING THE 
APPLIANCE

 

After power failure, the freezer can store food for several hours. 

1. 

Use during power failure 

After power failure, DO NOT put additional food in the appliance. If 

available, make and place ice in a container at the top of the freezer. 

2. 

Disconnecting the appliance 

When the freezer will not be used for a long time, remove the plug from the 

outlet and clean the appliance. The door should be kept open in order to 

prevent odor.

 

TROUBLESHOOTING  TIPS 

 

1. 

The refrigerator does not work 

It may not be connected to an appropriate power supply. 

2. 

The refrigerator does not work efficiently 

There may be too much frost.  The temperature is set too low.  The door is 

opened too frequently or kept open for too long. 

3. 

It makes unusual noises 

The appliance is not sitting leveled with respect to the ground. 

4. 

The compressor keeps working for a long period 

The environment temperature may be too high. The doors may be opened 

too frequently or are left open for too long. Setting the temperature 

control knob at 4-7 may increase the working time of the compressor. 

5. 

Disgusting odor 

Food with strong odor should be packed tightly before being placed inside 

the appliance. Check for spoiled foods or if the interior is dirty. 

6. 

Water leaks from the bottom of the refrigerator 

The drain tube is jammed. 

7. 

Heavy frost occurs on the rear of the appliance 

Putting humid or hot food into the appliance may cause this problem. 

There is too much moisture in the environment. 

 

1. 

Moisture may accumulate on the outside of the product 

2. 

The flow of refrigerant through the pipeline coil makes a noise. 

3. 

The sides of the product get warm because of the cooling pipeline.

 

 

 

 

 

The follow cases are not signs of a malfunction 

Reviews: