Nexcom XPPC 10-200 User Manual Download Page 58

Page: 58 / 58

XPPC 10-200 User Manual

Chapter 4: BIOS Setup

Save & Exit

Advanced

Security

Boot

Main

Aptio Setup - AMI

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Reset the system after saving

the changes.

Save Options

Save Changes and Reset

Discard Changes and Reset

Default Options

Restore Defaults

Save & Exit

Save Changes and Reset

To save the changes and reset, select this field then press <Enter>. A dialog

box will appear. Confirm by selecting Yes.

Discard Changes and Reset

To exit the Setup utility and reboot the system without saving the changes,

select this field then press <Enter>. You may be prompted to confirm again

before exiting.

Restore Defaults

To restore the BIOS to default settings, select this field then press <Enter>.

A dialog box will appear. Confirm by selecting Yes.

Summary of Contents for XPPC 10-200

























































Search results

Summary of Contents for XPPC 10-200

Reviews:

Brands by name

Popular brands

Nexcom XPPC 10-200, User Manual

Search results

Summary of Contents for XPPC 10-200

Reviews:

Brands by name

Popular brands