Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
34
XPPC 10-200 User Manual
Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Advanced
Security
Boot
Save & Exit
Main
Version 2.21.1278 Copyright (C) 2021 AMI
Aptio Setup - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
State After G3 [SO State]
Wake on LAN Enable
[Enabled]
CPU Configuration
Trusted Computing
SATA Configuration
F81804 Super IO Configuration
Hardware Monitor
AMI Graphic Output Protocol Policy
Network Stack Configuration
NVMe Configuration
State after G3
Configures which state to enter when power is re-applied after a power
failure (G3 state).
Wake on LAN Enable
Enables or disables integrated LAN to wake the system.
