Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
34
TPPC 2401/2701/3201 User Manual
Chapter 3: System Setup
Installing a SO-DIMM Memory Module
Installing an M.2 Module
1. With the chassis cover removed, locate the SO-DIMM socket and insert
the module into the socket at an approximately 30 degrees angle. Push
the module down until the clips on both sides of the socket lock into
position. The clips at the ends of the socket will automatically snap into
the locked position to hold the module in place.
1. With the chassis cover removed, locate the M.2 socket and insert the
module into the socket at an approximately 45 degrees angle until the
gold-plated connector on the edge of the module completely disappears
into the slot.
Memory Module
M.2 Module