Nexcom Peak 550, User Manual

Page: 60 / 82

Peak 550 User’s Guide
BIOS Setup 4- 38
BAD TRACK LIST
Auto scan bad track
The utility will automatically scan bad tracks and list the bad tracks
in the window at the right side of the screen.
Add bad track
Directly type in the information of the known bad tracks in the window
at the right side of the screen.
Modify bad track
Modify the information of the added bad tracks in the window at the
right side of the screen.
Delete bad track
Delete the added bad tracks in the window at the right side of the screen.
Clear bad track table
Clear the whole bad track list in the window at the right side of the screen.
PREFORMAT
Interleave
Select the interleave number of the hard disk drive you wish to perform
low level format. You may select from 1 to 8. Check the documentation
that came with the drive for the correct interleave number, or select 0 for
utility automatic detection.
Auto scan bad track
This allows the utility to scan first then format by each track.
Start
Press <Y> to start low level format.