Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
45
NSA 7131 User Manual
Chapter 4: BIOS Setup
Port 0 to Port 2
Enables or disables sSATA port 0 to port 2.
Hot Plug
Enables or disables hot plugging feature on sSATA port 0, port 1 and port 2.
sSATA Device Type
Identifies what type of sSATA device is connected.
PCH SATA Configuration
Save & Exit
Advanced
Security
Boot
Main
Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Enable or Disable SATA
Controller
PCH SATA Configuration
------------------------------------------------------------------------------------
SATA Controller
Configure SATA as
SATA Port 0
Port 0
SATA Device Type
SATA Port 1
Port 1
Hot Plug
SATA Device Type
SATA Port 2
Port 2
Hot Plug
SATA Device Type
SATA Port 3
Port 3
Hot Plug
SATA Device Type
IntelRCSetup
[Enabled]
[AHCI]
[Not Installed]
[Enabled]
[Hard Disk Drive]
[Not Installed]
[Enabled]
[Disabled]
[Hard Disk Drive]
[Not Installed]
[Enabled]
[Disabled]
[Hard Disk Drive]
[Not Installed]
[Enabled]
[Disabled]
[Hard Disk Drive]
SATA Controller
Enables or disables the SATA controller.
Configure SATA as
Configures the SATA as IDE or AHCI.
IDE
This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
▲
▼
