Nexcom NIO200 HAG User Manual Download Page 62

Page: 62 / 120

NIO200 HAG User Guide

Page 62 of 120

7.6.3. Restart

This section enables the user to restart the applications running on the NIO 200HAG Gateway.

The “

Restart Applications

” restart all applications, without rebooting the board.

The “

Restart NIO200 Hardware

” reboots the NIO 200HAG Gateway.

NOTE:

After restarting the applications or rebooting the NIO 200HAG Gateway, the Monitoring
Control System becomes inoperative for a few minutes.

After Stopping the applications, the Monitoring Control System becomes inoperative until
the next power cycle.

7.6.4. Access NEXCOM NIO200 admin website

This section allows the user to navigate to NEXCOM NIO200 admin website, where the NIO200

Network Configuration (WiFi settings, IP Addresses, NTP Server, etc) can be changed.

Summary of Contents for NIO200 HAG

























































































































Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands

Nexcom NIO200 HAG, User Manual

Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands