Nexcom NIO200 HAG User Manual Download Page 56

Page: 56 / 120

NIO200 HAG User Guide

Page 56 of 120

To load a list:

1. Click on

Browse

to locate the text file that you wish to load, and click

Upload

2. Click

Activate

, to load the new burst messages list into the Monitoring Host. The current

Monitor_Host_Publishers.conf” file will be overwritten.

Exporting the Burst Message Definitions:

This page also enables you to export the publisher list (including channels), by clicking

Download

the

“Manage burst messages list” section.

7.6 MODBUS

This section enables you to map WIRELESSHART attributes to Modbus registers.

Click

Help

in the upper right corner of the window to view information and examples of the

accepted data formats in all the sections.

Summary of Contents for NIO200 HAG

























































































































Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands

Nexcom NIO200 HAG, User Manual

Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands