Nexcom NIO200 HAG User Manual Download Page 43

Page: 43 / 120

NIO200 HAG User Guide

Page 43 of 120

7 Configuration

The configuration section enables you to view and edit certain settings for the

configuration/provisioning of the devices and the network, including connection settings,

publishers, alert subscriptions, and Modbus register mapping.

IMPORTANT:

This section is intended for users with thorough technical knowledge, and certain
configurations require advanced expertise, therefore they should be carefully planned,
as any inconsistencies may render the devices/network inoperative.

NOTE:

The changes you perform in the settings for each separate entity will also be reflected in the
Advanced Settings page and vice-versa.

7.1 Access Point

The Access Point configuration page consists of 4 sections, as shown is the image below. On hover

over an edit box a tooltip will appear, indicating the allowed format and range for each value.

Under General Settings:



Specify the EUI64 address, the tag and the Network ID. The Network ID is a unique numeric

identifier for the WirelessHART network.



Summary of Contents for NIO200 HAG

























































































































Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands

Nexcom NIO200 HAG, User Manual

Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands