Nexcom NIO200 HAG, User Manual

Page: 38 / 120

NIO200 HAG User Guide Page 38 of 120

Classification (the type of variable, e.g. 64 - temperature); please consult the WirelessHART
Common Table No. 21 for a comprehensive list of variables and associated classification
codes ,



Unit Code (the unit of measurement of the variable in question); please consult the
WirelessHART Common Table No. 2 for a comprehensive list of unit codes and their
descriptions,



Update Period (the frequency configured for data publishing, in seconds),



Last Update (the timestamp of the last value received in GW),



Received (the number of packets received by the particular device),



Missed (the number of packets that did not reach the particular device).

The total number of rows in the table is indicated in the top left corner of the table. Here you can set
the number of items to be displayed per page in the table. The default number is 10. Paging controls
in the top right corner of the table also enable you to navigate through the other pages of the table .
From this page you can also save the search results into a Microsoft Excel CSV file, by
clicking Export .
6.7 Commands Log
In this page you can view all the commands issued on the registered devices in the system. The
commands can be filtered by Device, Command (type), or Command Status (New
– command posted
in database, Sent
– command sent to device, Responded – device responded successfully to the
command, Failed
– command failed to execute).
To search for commands, select the desired device, command, and command status and click
Search . The results will be displayed in a table, as shown in the screen above, with the following
information for each command:

Tracking Number (internal ID of the command),



EUI-64 address (MAC address of the command destination device),



Command (name of the executed command),

