Nexcom NIO200 HAG, User Manual

Page: 37 / 120

NIO200 HAG User Guide Page 37 of 120
The total number of rows in the table is indicated in the top left corner of the table. Here you
can set the number of items to be displayed per page in the table. The default number is 10.
Paging controls in the top right corner of the table also enable you to navigate through the
other pages of the table .
6.6 Readings
In this page you can view the readings received from the devices, which are generated either on
demand by Read Value commands or by automatic burst messages. The readings can be filtered by
device, variable name, command number or the device variable code.
To search for readings, select a device or fill out the input fields as desired and click Search . The
results are displayed in a table that contains the following information for each reading:

Device EUI-64 address (MAC address of the device that reported the reading),



Timestamp (date and time of the reading),



Name (the variable name),



Command No. (the number of the command triggering the reading),



Device Variable (the variable code as per the WirelessHART specification),



Value (the value received on that particular reading)
– shown in engineering values,

