Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
47
NDiS B338 User Manual
Chapter 4: BIOS Setup
Save & Exit
Save & Exit
Advanced
Boot
Security
Save & Exit
Main
Version 2.22.1282. Copyright (C) 2022 AMI
Aptio Setup Utility - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Exit system setup after saving
the changes
Save Options
Save Changes and Exit
Discard Changes and Exit
Default Options
Restore Defaults
Boot Override
UEFI: KingstonDataTraveler SE9PMAP, Partition 1
(KingstonDataTravel SE9PMAP)
UEFI: Built-in EFI Shell
Save Changes and Exit
To save the changes and exit, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Exit
To exit the Setup utility and reset without saving the changes, select this field
then press <Enter>. You may be prompted to confirm again before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes.
Boot Override
To bypass the boot sequence from the Boot Option List and boot from a
particular device, select the desired device and press <Enter>.
