Nexcom EBC-3A1 Series, User Manual

Page: 46 / 67

46
3.4.3. RC.LOCAL
RC.LOCAL Information
In order to have a command or program run when the boots, you can add commands to
the rc.local file. This is especially useful if you want to be able to plug your EBC-3011 in to
power headless, and have it run a program without configuration or a manual start.
root@ICM-3011:/etc/rc5.d# cat /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
exit 0