background image

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

xi

EBC 355A User Manual 

Preface

Global Service Contact Information

Headquarters

NEXCOM International Co., Ltd.

9F, No. 920, Chung-Cheng Rd.,  
ZhongHe District, New Taipei City, 23586, 
Taiwan, R.O.C.
Tel: +886-2-8226-7786        
Fax: +886-2-8226-7782             
www.nexcom.com

America

USA

NEXCOM USA

2883 Bayview Drive, 
Fremont CA 94538, USA 
Tel: +1-510-656-2248 
Fax: +1-510-656-2158
Email: [email protected]
www.nexcom.com

Asia

Taiwan

NEXCOM Intelligent Systems
Taipei Office

13F, No.920, Chung-Cheng Rd.,

ZhongHe District,

New Taipei City, 23586, Taiwan, R.O.C.

Tel: +886-2-8226-7796

Fax: +886-2-8226-7792

Email: [email protected]
www.nexcom.com.tw

NEXCOM Intelligent Systems
Taichung Office

16F, No.250, Sec. 2, Chongde Rd.,  
Beitun Dist., 
Taichung City 406, R.O.C. 
Tel: +886-4-2249-1179
Fax: +886-4-2249-1172
Email: [email protected]
www.nexcom.com.tw

Japan

NEXCOM Japan

9F, Tamachi Hara Bldg., 
 4-11-5, Shiba Minato-ku, 
Tokyo, 108-0014, Japan 
Tel: +81-3-5419-7830
Fax: +81-3-5419-7832
Email: [email protected]
www.nexcom-jp.com 

China

NEXCOM China

Floor 5, No.4,  No.7 fengxian middle Rd.,
(Beike Industrial Park), Haidian District,
Beijing, 100094, China
Tel: +86-10-5704-2680
Fax: +86-10-5704-2681
Email: [email protected] 
www.nexcom.cn

Summary of Contents for EBC 355A



























































Reviews: