Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
48
NISE 4300 User Manual
Chapter 4: BIOS Setup
Graphics Configuration
Chipset
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select DVMT5.0 Total Graphic
Memory size used by the
Internal Graphics Device.
Graphics Configuration
DVMT Total Gfx Mem
[256M]
DVMT Total Gfx Mem
Selects the DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
PCH-IO Configuration
This section is used to configure PCH-IO configuration.
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
USB2.0 Power State in Standby
Configures the USB 2.0 power state in standby mode.
USB3.0 Power State in Standby
Configures the USB 3.0 power state in standby mode.
Front USB Power State in Standby
Configures the front USB power state in standby mode.
Chipset
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Device Options Settings
PCH-IO Configuration
SATA And RST Configuration
Security Configuration
State After G3
USB2.0 Power State in Standby
USB3.0 Power State in Standby
Front USB Power State in Standby
LAN1(UP)
LAN1(DOWN)
M.2
MINIPCIE
[S0 State]
[Power Off]
[Power On]
[Power Off]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
►
►
