manualshive.com logo in svg

Nexcelom Bioscience Cellometer Auto T4, User Manual, Page: 19 / 75

Share
Download
Nexcelom Bioscience Cellometer Auto T4 User Manual Download Page 19

 

8001009 Cellometer® Auto T4 User Manual Rev C 

 

13 

Chapter 4. Unpacking and Site Preparation 

This chapter presents site preparation facility requirements for setting up the Auto T4 system and transporting 
instructions if the instrument must be moved to another location. 

UNPACKING THE INSTRUMENT 

Congratulations on your purchase of one of the best declustering cell counters available!

 Please ensure you have 

secured the space required to set up the Auto T4. Visit the 

Cellometer Auto T4

 page on our website, click the 

Resources

 tab and scroll down to find 

Training Videos

 for unboxing and getting started with the instrument.  

Our staff would be happy to help you set up your Auto T4. Contact Nexcelom Support for assistance at  
+1 (978) 327-5340 or via email: 

[email protected] 

1.

 

Inspect the package to ensure no damage has occurred during shipping, if applicable.  

Contact Nexcelom Support if damage has visibly affected the instrument.

 

2.

 

Ensure the box is facing up (i.e., 

This End Up

 symbol is facing in the right direction). If not, 

carefully turn the box right side up. 

Box will weigh approximately 10 lbs (4.7 Kgs).

 

3.

 

Open the outer box. 

4.

 

Remove protective packaging. 

5.

 

Remove the inner box.  

6.

 

Open the secondary box to remove the Power Cord, USB Computer Cable and Software USB. 

7.

 

Remove the Auto T4. 

8.

 

Place the Auto T4 in the prepared area (see 

Facility Requirements

 on page 

14

). 

9.

 

Remove the protective seals around the Auto T4. 

10.

 

Insert the Power Cord Connector into the Auto T4. 

11.

 

Plug the Power Cord into a surge protector (recommended) or power outlet.  

12.

 

Obtain the USB 2.0 Computer Cable. 

13.

 

If you have purchased a Nexcelom Laptop or have installed the Cellometer software on a laptop meeting 
Nexcelom minimum specifications, connect the Auto T4 to the laptop using the USB 2.0 Computer Cable.  

Note:

 If you have 

not yet

 installed the software, do 

not

 connect the instrument to the computer until directed 

during software installation. 

14.

 

Turn the Auto T4 Power Switch to the ON position. The system is now ready for use. 

Auto T4 IQ/OQ Validation 

Nexcelom Bioscience has designed an 

Installation Qualification/Operation Qualification (IQ/OQ)

 validation 

specifically for the Cellometer Auto T4. Our experienced Support team is available to assist your organization 
during set up of the instrument and while performing the IQ/OQ validation. Contact Nexcelom Support for more 
information at +1 (978) 327-5340 or via email: 

[email protected] 

Summary of Contents for Cellometer Auto T4












































































Reviews:

No comments