NEWTON S
12
SYSTEM OPERATION MANUAL
4 Operation
4.1
USER INTERFACE AND CONTROLS
!
NOTICE
!
This manual describes controls and interfaces when using the default
mappings. Most buttons and rotary dials on the Newton C1 can be
remapped by the user, if this has been done the exact references in this
manual will not be correct.
4.1.1
NEWTON C1
The graphical user interface is the main way to interact with and get feedback from the Newton C1.
User feedback is given on the display (point 28) and input is given using the buttons under it (point
12-16). The exact functionality of the buttons are context dependent and displayed at the bottom of
the display.
The main page, shown after startup, provides feedback on all major functions. It is divided into two
major parts; the left hand part of the screen displays feedback for lens and camera control (collectively
referred to as FIZC) while the right hand part provides feedback for the remote head, the Newton C1
itself and the communication link.
Focus indicator
Zoom indicator
Iris indicator
Mode indicator
Connection status
Record status
Communication interface
Lens presets
Figure 4.1: Newton C1 Main Page
DO NOT DISTRIBUTE
Copyright © 2019 Newton Nordic AB
