NewTek Tricaster TCXD850, User Manual, Page: 135 / 336

Page | 119
7 I/O CONFIGURATION
TriCaster provides extensive control over your video signal at both
input and output stages.
Every video source has its own realtime Proc Amp and keyer (via
LiveMatte). As well, TriCaster supports independent Proc Amp
settings for its Program and Multiview outputs
It is very useful to be able to adjust each source and also the output stream independently.
Source configuration options ensure that you can match camera inputs to each other, and that
their signals fall within legal ranges (it’s best to use camera white balance controls whenever
possible, mind you).
Output proc amp settings allow you to make adjustments for a specific purpose. For example,
independent
Proc Amp controls make it simple to tweak the Multiview output to conform to
local conditions such as projector color temperature variations, projection surface color and local
lighting conditions – without affecting the video output streams.
Let’s begin with a consideration of Output Configuration tools.
7.1 OUTPUT CONFIGURATION
Figure 114
Roll the mouse pointer over Program Output to reveal a Configure button (Figure 114) above the
top-right corner of the display. Click it to open the Output Configuration panel (Figure 115).