NewTek Tricaster TCXD850, User Manual, Page: 74 / 336

Page | 58
12. Click the button labeled Auto below the T-Bar (again, the main Auto button, not to be
confused with the local Auto buttons at right).
Figure 51
13. Note that local configuration settings for the BKGD layer do affect transitions performed
using the main controls:
a. Click a different transition icon in the BKGD Transition Bin , and click the Auto
button again. (TriCaster supplies a wealth of transitions to suit every need).
b. Click the [S] button (beside the local Take button in the BKGD layer controls) to
select a slower transition speed preset, and click Auto again to test the new
rate of change.
Hint: Manually control the progress of a transition by grabbing the T-bar with the left mouse
button and dragging it downward.
14. Earlier, we displayed DSK 1 , using its local Take button. The BKGD transitions we’ve
made did not affect it, so it should still be displayed (if you removed it from view while
experimenting, please restore it before continuing).
Figure 52
15. With the BKGD delegate button lit up, press Ctrl on your keyboard, and keep it pressed
while you click the buttons for both DSK 1 and DSK 2 – then release it.