NewTek Tricaster TCXD850, User Manual, Page: 41 / 336

Page | 25
Figure 17
The HDMI connector provides a primary program output from the Live Desktop’s Switcher .
Simply connect a suitable external monitor or device to the HDMI connector on the backplane.
TriCaster’s
Multiview output is supplied by a nearby DVI connector. Again, connect a suitable
external monitor or device. The new device should be recognized and enabled by the system
automatically. This output offers a variety of optional monitoring layouts that can be selected at
any time in TriCaster’s
Live Desktop .
Note: For best results, it is important to configure Multiview Output to the native resolution of
the external display (monitor or projector) connected.
3.7 TALLY LIGHTS
TriCaster’s Tally Light support allows you to connect external tally lights and similar devices.
These typically provide a red LED for the video input that is currently selected on the Switcher’s
Program row. (For Virtual Inputs , the LED will light up when the source assigned to Input A is
selected.)
3.7.1 EXTERNAL CONNECTIONS
Here is a pin-out listing for TriCaster TCXD850’s DB15 Tally connector: