NewTek Tricaster TCXD850, User Manual, Page: 209 / 336

Page | 193
12.2 POSITION
Figure 175
Pos (Position) controls for both Input A and Input B appear to the right of their respective
selector button rows (Figure 175). Click the neighboring Configure button (gear) to open the
Position panel (Figure 176) for a given channel. Enable or disable all settings using the switch
provided at upper left.
Figure 176
At left is a group of controls labeled Crop Edges , which provide identical but independent
functionality to that found in the LiveMatte & Crop tab of Input Configuration . Positioning
controls are grouped at right. Located at the top of this section are three interactive buttons,
labeled
Position, Rotation, and Size .
Click and drag on Position to adjust the location of the source within the output frame. (It is
useful to display the corresponding Virtual Input using the Switcher’s Preview row while making
adjustments). Notice that by dragging left or right on either of the two numeric gadgets below,
you can adjust
Position on a single axis.