NewTek Tricaster TCXD850, User Manual, Page: 174 / 336

Page | 158
9.3.2 INTERACTIVE CONTROL
The onscreen monitors (with the exception of Preview ) are actually interactive live production
controls. You can click them to perform many Switcher operations. Here’s a list of things to try:

Click on an unselected monitor to place it on the Preview row.

Click the same monitor again to perform a ( BKGD layer only) Take , swapping it with the
current Program row selection, and sending it to Program Output ).

Double-click any monitor to immediately send that source to Program Out (replacing
the previous BKGD layer, and sending its predecessor to the Preview row).

Shift + click the monitor selected on the Preview row to Transition it to the current
BKGD layer, again sending its predecessor to the Preview row.

Shift + double-click any unselected monitor to Transition the BKGD layer to it (sending
the original Program selection to Preview ).
(Observe that the Autoplay switches respond normally when you switch interactively in this
manner.)
INTERACTIVE TITLEBAR TOOLS
Figure 147
The
Proc Amp , Crop and LiveMatte titlebar flags allow you to selectively enable or disable these
features, simply by clicking them – without any need to open the Input Configuration panel.