NewTek TriCaster TCXD300, User Manual

Page: 83 / 290

Page | 67
Figure 61
(We’ll use a pre-recorded sample clip for this task, but of course if you happen to have a
greenscreen setup ready to use, just skip the first three steps below, and select the appropriate
Input button on the Switcher’s Program row - instead of the DDR ).
1. If necessary, remove the Overlay channels from Program Out .
2. Click the DDR tab, and select DDR as the Program row source on the Switcher .
3. Add the video clip named Kiki Center.mpg from the Greenscreen group inside the
Clips>NewTek location.
4. Click the Stills tab, and add the image named texas_weathermap.png ( from Practice
Session, under Stills in the Location list).
5. Select Stills on the Effects row in the Switcher (this defines what will appear behind our
greenscreen shot in the result).
6. If you are not already viewing All Monitors , click that tab at the top of TriCaster’s Live
Desktop .
7. Move your mouse pointer over the DDR Monitor .