NewTek TriCaster TCXD300, User Manual, Page: 69 / 290

Page | 53
Hint: If you choose ‘Audio + Video’, selecting ‘Include Separate mp3 file’ is useful if your
editing software doesn’t support the embedded audio in TriCaster’s MPEG2 files.
6. Make sure you have an active source playing on Program Output .
7. Press the Record button – it will illuminate, and the neighboring timecode field will
begin keeping track of the duration of your recording.
8. After a little while, press Record again to stop recording.
You can record anything that is displayed on Program Output in this manner. This lets you
record your entire live production if you like, but it also provides a way for you to capture clips
for playback (from TriCaster’s DDR)
during live events.
4.7.2 GRAB
Figure 46
The Grab feature is quite similar to Record, just described - except of course that it grabs a fresh
still image from Program Output each time you click the Grab button.