NewTek TriCaster TCXD300, User Manual

Page: 68 / 290

Page | 52
Located immediately beneath the Program Output monitor are Stream , Record and Grab
buttons, along with their respective Configure buttons. We’ll discuss streaming further on, but
let’s consider Record and Grab here.
4.7.1 RECORD
1. Click the Configuration button (gear) next to Record .
2. The Record Configuration panel opens.
3. Click in the Base Name field, and enter a unique name for the captured file(s). Note
that recorded clips are always stored in TriCaster’s default Clips folder.
4. Optionally, enable the Add to DDR Playlist switch to automatically add newly recorded
clips to the current DDR playlist.
Hint: TriCaster stores recordings at C:\TriCaster\Media\Clips\sessionname\Capture
(replace “sessionname” with your actual session name).
Figure 45
5. Click Audio + Video , and then click Close .