NewTek TriCaster TCXD300, User Manual

Page: 67 / 290

Page | 51
Figure 43
1. Click the Transition button
i. Camera 1 is gradually removed from Program Out
ii. Camera 2 (previously the Preview row selection) takes its place on Program Output
iii. The Camera 2 button is now lit up on the Program row
iv. The Camera 1 button is lit up on the Preview row
v. The red and green borders around the ISO monitors have been swapped
2. Click Take to force the swap between Program and Preview row selections to occur
instantly
3. Click a different transition icon in the selector pane (beside FTB ), and click the Transition
button again. (TriCaster supplies a wealth of transitions to suit every need)
4. Click the [S] button to select a slower speed preset, and click Transition again to test the
new rate of change
Hint: you can manually control the progress of a transition by grabbing the T-bar with the left
mouse button and dragging it downward.
4.7 RECORD AND GRAB
Figure 44