Section 1
QUICKSTART
This section explains how to connect and configure your NewTek TCMI4KUHD device. It
also explains how to update, and where you can find additional NDI
®
software to extend
your workflow. After completing this
section, you’ll be
ready to begin using your device.
T
his document briefly describes how to prepare your new NewTek™
TCMI4KUHD device for use. Please note
that more detailed information is provided in the next chapter.
Step 1
–
Connecting Your TCMI4KUHD Input Adapter
FIGURE 1
1.
Using a CAT-5 (or better) Ethernet cable, connect the TCMI4KUHD device to one of the four PoE
(Power over Ethernet) RJ-49 connectors labeled NDI1-4 on the rear of your TriCaster TC Mini.
Step 2
–
Access the Device Webpage
2.
Open the
Input Configuration
panel for the TriCaster
Switcher
input you intend to connect this
device to. To do so, right-click on either a
Switcher
button or the input
’
s monitor viewport and
select
Configure
in the context menu.
FIGURE 2
3.
Click the
Source
menu at upper-left in the input tab to view available sources.