NewTek tricaster advanced edition, User Manual, Page: 260 / 339

Page | 244
21.6.1
22.5.1 CONFIGURING TRICASTER
1.
Connect a suitable video source to a camera input on your TriCaster live production system.
2.
Select that source on the Switcher’s Program row.
3.
Open TriCaster’s Record Configuration panel and set the Primary Source (typically to the Program
option).
4.
Select a suitable encoding format for the captured files.
5.
Use the Add to menu in the Primary Recording controls to assign the recorded clips to either DDR 1 or 2.
21.6.2
OVERVIEW
TriCaster 860 TW is quite straightforward to use, especially true if you are already familiar with common
TriCaster controls and features. In this section, we’ll discuss each part of the control surface, explaining how
the various controls operate and what effect they have, revealing a few little tricks that you may find helpful
along the way.
TimeWarp provides convenient control over TriCaster’s two DDRs as well as the recording of sources
configured for capture.
FIGURE 21-38
Edit
Qualifiers Record
DDR
delegates
DDR Transport
DDR options
Preset
Mark
ALT