NewTek tricaster advanced edition, User Manual, Page: 234 / 339

Page | 218
ROT (R
OTATE
)

Move the joystick horizontally (as viewed from above) to rotate delegated sources on the Y axis.
 Move the joystick vertically to rotate delegated sources on the X axis.

Twist the joystick clockwise/counter-clockwise to rotate delegated sources on the Z axis.
CROP

Twist the joystick clockwise (as viewed from above) to crop delegated sources inward on all four
edges, maintaining the original aspect ratio.

Twist the joystick counter-clockwise to reduce cropping of delegated sources on all 4 edges.

Move the joystick horizontally to crop only the left edge of delegated sources.

Move the joystick horizontally with the joystick button pressed to crop only the right edge of delegated
sources.
 Move the joystick vertically to crop only the top edge of delegated sources.

Move the joystick vertically with the joystick button pressed to crop only the bottom edge of delegated
sources.
RESET
Despite its location, RESET is really an action button (not a Joystick mode). Press it to restore all position
settings for currently delegated source(s) to their defaults. (This is also why RESET does not stay selected
when pressed, nor does it change the current Joystick mode.
The two special delegate selections also work differently with RESET:

When VIRTUAL ZOOM is delegated, the LiveSet preset for delegated M/Es) is reset to the #1 preset.

When SHUTTLE is delegated, selected Media Players are reset to the starting point of the current item
(or playlist).
M
ONITORING
While using the joystick in most POSITIONER DELEGATE modes, many adjustments are temporarily shown
on the Live Desktop’s Preview monitor. The Preview monitor reverts to its default display a few moments
after releasing the joystick to its at-rest position, just as occurs when using Positioner tools on the Live
Desktop.
21.3.6
MANAGING COMPS
Comps are one of the most exciting features of TriCaster Advanced Edition, and your control surface makes
it easy to apply and manage them. The 16 Comps available for the main Switcher or each individual M/E are
associated with the first sixteen buttons on the DSK/ KEY rows of your 8000 CS.