NewTek 3Play 440, User Manual

Page: 29 / 262

Page | 13
2.6.4 MONITORING
Figure 7
By default, the Replay Desktop includes two large output monitors at right, labeled A and B . The
area at left shows input monitors as appropriate for the number of sources you have configured
for recording, For example, in Redundant (4 Channel) mode operation, four input monitor
viewports are displayed.
Tip: The display configuration for 3Play’s secondary Multiview output is governed by controls
found in the Output Configuration panel.
CHANNEL INFO AND CONTROLS
The region of the Replay Desktop just below the primary output monitors also provides some
very special features. First, data pertinent to the current video source for each output is
displayed in a
Channel Info area immediately below (Figure 8) the corresponding viewport.
Figure 8
Tip: Normally, the selected Channel Delegate button on the Control Surface determines which
channel – A or B – CS operations are currently governing. Note that you can also delegate a
channel using the mouse, by clicking the Channel Info area beneath either the A or B monitor.