NewTek 3Play 440, User Manual

Page: 122 / 262

Page | 106
This provides a convenient warning as the time for your
event nears. In similar fashion, enabling the
End switch
and entering an appropriate time displays a countdown to
the end of the event (shown once the
Start t ime is
surpassed) when clocks are displayed on Multiview .
Tip: You can modify these time values by clicking on them and typing, or by dragging the mouse
point left or right over them. Conveniently, you can ignore timecode punctuation when entering
numbers if you like: simply type the key digits using 24 hour notation. (For example, to set the
time to 5:00.00 AM, press “5”, and then Enter. Or to set the time to 3:30 PM, type “1530” and
press Enter.)
7.4.2 TIME
The Timecode control group menu allows you to select between timecode sources as follows:
Figure 90 – 3Play 4800
Figure 91 - 3Play 440
3Play 4800

None (System Clock)

Input 7 (Mic Level)

Input 7 (Line Level)
3Play 440

None (System Clock)

Input 3 (Mic Level)

Input 3 (Line Level)

1/8” Mic (Mic Level, Red)

1/8” Line (Line Level, Blue)
Figure 89