Logging Data to a File for Upload to PC
1919-R User Manual
79
The available parameters vary per the selected
Stop
mode option.
2.
Proceed to configure the selected
Stop
mode parameters, as described in the following
sections.
10.2.1
Manual Mode
Logging does not terminate at a predefined condition. Rather, it continues until the user presses
the
Stop
key.
To set the Stop Mode to Manual:
1.
In the
Log Setup
screen, set the
Stop Mode
to
Manual
. The
Log Setup
screen displays the
following parameters:
Figure
10-4 Manual - Stop Mode
2.
Go to each parameter and set the relevant options, as required:
Sample Rate:
Enables you to control the number of readings that will be added to the log.
Options include:
Every Reading
1 of 3 Readings
1 of 10 Readings
1 of 30 Readings
1 of 100 Readings
1 of 300 Readings
1 of 1000 Readings
