NewLine TRUCAST 3, User Manual, Page: 27 / 44

27
< Concurrent AP and Station Mode>
Access Point

SSID: You can change the default SSID and the maximum Length is 32 bytes.

SSID Broadcast: The default value is “Enable”

Channel: You can set a fixed channel or allow auto selection. The “Auto”
selection means after power on TRUCAST, it will scan all of wireless channels
and select one clear channel automatically.

Encryption: you can select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA
Enterprise/ WPA2 Enterprise.

Key: If Encryption is enabled, you have to enter a key according to the
encryption mode you selected. (If the length of the key entered is not
sufficient or too long, a warning message will pop up.)

Channel Bandwidth: select from 20M or Auto (20M/40M)
WiFi Station:

Connect to Existing AP: The default setting is “Disable”. If you choose “Enbale”