NewLine TRUCAST 3, User Manual, Page: 25 / 44

25
8.7 WiFi Setup

Wireless LAN: The default setting is “Enable”

Mode: Specify the WiFi Access Point mode, WiFi Station mode and Concurrent
AP and Station Mode.
< Access Point Mode>

SSID: You can change the default SSID and the maximum Length is 32 bytes.

SSID Broadcast: The default value is “Enable”

Band: 5G or 2.4G

Channel: You can set a fixed channel or allow auto selection. The “Auto”
selection means after power on TRUCAST 3, it will scan all of wireless
channels and select one clear channel automatically.

Encryption: you can select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA
Enterprise/ WPA2 Enterprise.

Key: If Encryption is enabled, you have to enter a key according to the
encryption mode you selected. (If the length of the key entered is not
sufficient or too long, a warning message will pop up.)