28
Enable Scan
Check or uncheck the “Enable scan” item to enable or disable the scanning feature of the WD1.
Output Mode
The WD1 provides three output modes: Simulate keystroke, Output via API, and Fill in EditText directly.
1.
Simulate keystroke:
Output scanned data to keyboard buffer to simulate keyboard input.
Character interval (ms): A character interval of 0-100 milliseconds may be placed between the transmissions of each
character of scanned data.
2.
Output via API:
The application acquires scanned data by receiving system broadcasts.
3.
Fill in EditText directly:
Output scanned data at the current cursor position in EditText.
Output enter-event:
Send an Enter Key after each barcode is scanned.
Send virtual keyboard function
: Make send virtual keyboard function as “action done”, “action search”, “action previous”,
action search, etc.
