13
Charging the Battery
Connect the WD1 to a power outlet using the included AC adapter. When the terminal’s battery is less than 5%, it takes
about 4 hours to fully charge it (The terminal is shut down or in sleep mode).
When charging the WD1 with an AC adapter, the user is notified of the charging statuses by the LEDs on the terminal.
LEDs on the WD1
Blue LED on
Fully charged
Red LED on
Charging in progress
Red LED flashes constantly
Low-battery alert
Note:
If the WD1 battery is completely drained, please press the power key to turn it on after 15 minutes of being charged.
