29
Scan Mode
The WD1 provides the following three scan modes:
1.
Level mode:
Press and hold the scan trigger to start a decode session which continues until the trigger is released.
2.
Continuous mode:
Press the scan trigger to continuously read barcodes. To suspend or resume scan operation, simply
press the scan trigger.
Scan interval (ms):
This parameter sets the timeout between decode sessions.
3.
Pulse mode:
Press the scan trigger to start a decode session which continues until the decode session timeout expires.
Decode session timeout (ms):
This parameter sets the maximum time decode session continues during a scan
attempt.
Masked repeat interval (ms):
This parameter sets the time interval between two successive reads on the same
barcode.
