Newland NLS-MT37, User Manual

Page: 19 / 73

11
Chapter 3 Basics
Introduction
This chapter provides the basics of setting and using the MT37.
Switching On/Restart/Switching Off the MT37
After installing the SIM card and battery and having the MT37 fully charged, you may switch the terminal on.
Switch the MT37 on: Hold down the Power key on the bottom of the terminal. Note that the initialization is going to take
some time before the MT37 displays the Home screen.
Restart the MT37: Hold down the Power key on the bottom of the terminal until the window below pops up, then tap “restart”.
Switch the MT37 off: Hold down the Power key on the bottom of the terminal until the window below pops up, then tap
“Power off”.