Enter Setup
71 *
* Exit Setup
EAN-13 Beginning with 977 Add-On Code Required
This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that
begin with
“977”. The following settings can be programmed:
Require Add-On Code:
All EAN-13 barcodes that begin with
“977” must have a 2-digit or 5-digit add-on
code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not
found, the EAN-13 barcode is discarded.
Do Not Require Add-On Code:
If you have selected
Require Add-On Code
, and you want to disable
this feature, scan
Do Not Require Add-On Code
. EAN-13 barcodes are handled, depending on your
selection for the
“Add-On Code Required” feature.
**
Do Not Require Add-On Code
Require Add-On Code
EAN-13 Beginning with 978 Add-On Code Required
This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that
begin with
“978”. The following settings can be programmed:
Require Add-On Code:
All EAN-13 barcodes that begin with
“978” must have a 2-digit or 5-digit add-on
code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not
found, the EAN-13 barcode is discarded.
Do Not Require Add-On Code:
If you have selected
Require Add-On Code
, and you want to disable
this feature, scan
Do Not Require Add-On Code
. EAN-13 barcodes are handled, depending on your
selection for the
“Add-On Code Required” feature.
**
Do Not Require Add-On Code
Require Add-On Code
Summary of Contents for NLS-HR3290
