Symbologies
nlscan.com
Page 91
Code Programming ON
Code Programming OFF
Tools
"Code Programming ON"
1.
"Select Min Message Length"
2.
Digit code "8", see Digit Code
3.
"Save Programming", see Digit Code
4.
"Select Max Message Length"
5.
Digit code "1"
6.
Digit code "2"
7.
"Save Programming"
8.
"Code Programming OFF"
9.
Chinese-Sensible Code
Select Message Length
It is used to program the valid reading length (bytes) of Chinese-Sensible Code. The engine
will produce an error beep, if the data length captured does not match the valid reading length.
Chinese-Sensible Code Message Length is defined by "Min. Message Length" and "Max.
Message Length".
2D bar code Message Length should not exceed 65535 bytes.
Max Message Length should not be shorter than Min Message Length.
To read a fixed length China Information Code, Please program Max & Min Message Length to
the same value.
Program China Information Code, Min Message Length 8 bytes, Max Message Length 12 bytes.
Min Message Length (default: 1)
【
Pro CMD
：
0508030
】
Max Message Length
（
default:7827
）
【
Pro CMD
：
0508040
】
