manualshive.com logo in svg

Newland NLS-HR1580-BT, User Manual

The Newland NLS-HR1580-BT barcode scanner offers high performance and durability. Easily set up and configure using the comprehensive User Manual available for free download from manualshive.com. This manual provides step-by-step instructions for maximizing the functionality of this advanced scanning device.

Share
Download
background image

Check Character Verification ............................................................................................................................................. 109

 

Code 39 .................................................................................................................................................................................... 110

 

Restore Factory Defaults ................................................................................................................................................... 110

 

Enable/Disable Code 39 .................................................................................................................................................... 110

 

Set Length Range for Code 39 .......................................................................................................................................... 111

 

Check Character Verification ............................................................................................................................................. 112

 

Transmit Start/Stop Character ........................................................................................................................................... 113

 

Enable/Disable Code 39 Full ASCII ................................................................................................................................... 113

 

Codabar .................................................................................................................................................................................... 114

 

Restore Factory Defaults ................................................................................................................................................... 114

 

Enable/Disable Codabar .................................................................................................................................................... 114

 

Set Length Range for Codabar .......................................................................................................................................... 115

 

Check Character Verification ............................................................................................................................................. 116

 

Start/Stop Character .......................................................................................................................................................... 117

 

Code 93 .................................................................................................................................................................................... 118

 

Restore Factory Defaults ................................................................................................................................................... 118

 

Enable/Disable Code 93 .................................................................................................................................................... 118

 

Set Length Range for Code 93 .......................................................................................................................................... 119

 

Check Character Verification ............................................................................................................................................. 120

 

GS1-128 (UCC/EAN-128) ......................................................................................................................................................... 121

 

Restore Factory Defaults ................................................................................................................................................... 121

 

Enable/Disable GS1-128 .................................................................................................................................................... 121

 

Set Length Range for GS1-128 .......................................................................................................................................... 122

 

GS1 Databar (RSS) .................................................................................................................................................................. 123

 

Restore Factory Defaults ................................................................................................................................................... 123

 

Enable/Disable GS1 Databar ............................................................................................................................................. 123

 

Transmit Application Identifier “01” .................................................................................................................................... 123

 

Code 11 .................................................................................................................................................................................... 124

 

Restore Factory Defaults ................................................................................................................................................... 124

 

Enable/Disable Code 11 .................................................................................................................................................... 124

 

Set Length Range for Code 11 .......................................................................................................................................... 125

 

Check Character Verification ............................................................................................................................................. 126

 

Transmit Check Character ................................................................................................................................................. 127

 

ISBN .......................................................................................................................................................................................... 128

 

Restore Factory Defaults ................................................................................................................................................... 128

 

Enable/Disable ISBN ......................................................................................................................................................... 128

 

Set ISBN Format ................................................................................................................................................................ 129

 

Summary of Contents for NLS-HR1580-BT


























































































































































































































Reviews:

No comments

Related manuals for NLS-HR1580-BT

Unitech MS912+ Quick Manual preview
MS912+
Brand: Unitech Pages: 18
Unitech MSR206 Specifications preview
MSR206
Brand: Unitech Pages: 2
AWID Sentinel-Prox DC-1023 User Manual preview
Sentinel-Prox DC-1023
Brand: AWID Pages: 12
Alien ALH-900h User Manual preview
ALH-900h
Brand: Alien Pages: 41
Printekmobile VehiclePro 400 Quick Start Manual preview
VehiclePro 400
Brand: Printekmobile Pages: 2
Memorex USB CompactFlash User Manual preview
USB CompactFlash
Brand: Memorex Pages: 4
AEG ARE i2-LF Installation Manual preview
ARE i2-LF
Brand: AEG Pages: 39
AEG ARE H9 User Manual preview
ARE H9
Brand: AEG Pages: 36
AEG ARE i2 - HF Installation Manual preview
ARE i2 - HF
Brand: AEG Pages: 50
AEG ARE I2 Installation Manual preview
ARE I2
Brand: AEG Pages: 33
Sony Felica RC-S360/S Specification preview
Felica RC-S360/S
Brand: Sony Pages: 2
Sony MCMD-R1 Notes On Usage preview
MCMD-R1
Brand: Sony Pages: 2
Sony AXSM AXS-AR3 User Manual preview
AXSM AXS-AR3
Brand: Sony Pages: 4
Sony DFP-R3000 Installation Manual preview
DFP-R3000
Brand: Sony Pages: 38
Sony MagicGate MSGC-US10 Operating Instructions Manual preview
MagicGate MSGC-US10
Brand: Sony Pages: 92
Sony DFP-R3000 Quick Start Manual preview
DFP-R3000
Brand: Sony Pages: 100
Winlong Industrial SCC-RF-MI-C40 User Manual preview
SCC-RF-MI-C40
Brand: Winlong Industrial Pages: 11
StarTech.com CFASTRWU3 Quick Start Manual preview
CFASTRWU3
Brand: StarTech.com Pages: 2

Brands by name

Popular brands

Load more brands