Newland NLS-HR1580-BT User Manual Download Page 21

Page: 21 / 217

Using RS-232 Cable

Connect the cradle to a Host using an RS-232 cable with RJ45 and RS-232 connectors:

1. Plug the RJ45 connector of the cable into the data port on the cradle.

2. Plug the RS-232 connector of the cable into the RS-232 port on the Host.

3. Plug the supplied power adapter into the power jack on the cradle.

Charging the Scanner Battery

To charge the scanner battery, insert the scanner in a powered cradle. You can check the charge status with the red and

green LEDs on the cradle.

Red LED steady on

No scanner placed on cradle

Red LED flashes

Charging in progress, low battery level

Green LED flashes

Charging in progress, medium battery level

Green LED steady on

Fully charged

Summary of Contents for NLS-HR1580-BT


























































































































































































































Search results

Summary of Contents for NLS-HR1580-BT

Reviews:

Related manuals for NLS-HR1580-BT

Brands by name

Popular brands

Newland NLS-HR1580-BT, User Manual

Search results

Summary of Contents for NLS-HR1580-BT

Reviews:

Related manuals for NLS-HR1580-BT

Brands by name

Popular brands