Newland NLS-HR1050-7 Series, User Manual

Page: 141 / 185

** Enter Setup
131 Exit Setup
Set Length Range for Standard 25
The scanner can be configured to only decode Standard 25 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths.
The supported maximum length is 255 characters. If minimum length is set to be greater than maximum
length, the scanner only decodes Standard 25 barcodes with either the minimum or maximum length. If
minimum length is same as maximum length, only Standard 25 barcodes with that length are to be
decoded.
Set the Minimum Length Set the Maximum Length
Example: Set the scanner to decode Standard 25 barcodes containing between 8 and 12
characters
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric
barcode “8”. (See the
Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes
“1” and “2”.
7. Scan the Save barcode.
8. Scan the Exit Setup barcode.