Newland NLS-FM515 Series, User Manual

Page: 144 / 162

Enter Setup
** Exit Setup
134
Create a Batch Command
A batch command may contain a number of individual commands each of which is terminated by a semicolon (;).
For more information, refer to the “Use of Programming Command” section in Chapter 3.
Create a Batch Barcode
Batch barcodes can be produced in the format of PDF417, QR Code or Data Matrix.
Example: Create a batch barcode for lllumination Always On , Sense Mode , Decode Session Timeout = 2s:
1. Input the following commands:
@ILLSCN2;SCNMOD2;ORTSET2000;
2. Generate a PDF417 batch barcode.