Newland NLS-FM515 Series User Manual Download Page 13

Page: 13 / 162

Chapter 1 Getting Started

Introduction

The NLS-FM515 series products are 1D linear barcode scanners for medical applications, mainly integrated into testing

instruments in laboratories, hospitals and assembly lines. It delivers fast and reliable reading of 1D printed barcodes on long-

distance test tubes or reagent bottles. The NLS-FM515 series includes NLS-FM515-V (lateral beam exit) and NLS-FM515-H

(front beam exit), distinguished by the direction of the beam exit.

Note: This guide provides general instructions for the installation. Fujian Newland Auto-ID Tech. Co., Ltd.

recommends an opto-mechanical engineer should conduct an opto-mechanical analysis before integration.

Symbologies

The FM515 can easily read printed barcodes and on-screen barcodes, including:

Code 128, EAN-8, EAN-13, UPC-E, UPC-A, Interleaved 2/5, Code 39, Codabar, Code 93, UCC/EAN-128

Summary of Contents for NLS-FM515 Series



































































































































































Search results

Summary of Contents for NLS-FM515 Series

Reviews:

Related manuals for NLS-FM515 Series

Brands by name

Popular brands

Newland NLS-FM515 Series, User Manual

Search results

Summary of Contents for NLS-FM515 Series

Reviews:

Related manuals for NLS-FM515 Series

Brands by name

Popular brands